S-400 configurable wireless timing system for a motorsport course plan

S-400 Timing for Motorsport Finish and Sector Points

S-400 motorsport finish timing starts with the control-line question, not the sensor count. Mark the finish, any sector points and the separate vehicle-return route before requesting a configuration.

The S-400 product page describes a configurable multi-point timing system with package choices that vary by controller and sensor count. That makes it a candidate for a defined venue plan, not a plug-and-play promise for every circuit or sanctioned race. Start with the event question: is the system logging a practice finish, a sector split, or a result used by officials?

Separate racing, timing and return-to-paddock routes

Draw three routes on the venue map. First, the active racing line and its control/finish line. Second, the timing and marshal positions. Third, the route vehicles take after finishing, retiring or receiving a release instruction. Keep the return path out of the active course unless race control's approved plan says otherwise.

“收车” can refer to the final finish procedure or the vehicle that sweeps a course. Neither should be triggered by a sensor result alone. The clerk of the course, race director or designated official controls flags, track status and vehicle movement under the event rules. A timing trigger is data; it is not a green light to enter the course.

Name every timing point before counting sensors

Label the control line, each required sector, pit entry or exit if applicable, and any practice start. Add travel direction and the event ID used in the results. Then check whether the intended S-400 package supports those points simultaneously and which mode applies. The current product listing includes host-plus-sensor package options, but the exact configuration and method must be confirmed with the supplier.

PointQuestionRecord to retain
Control/finish lineWhich event or lap boundary is represented?Map reference and configured station label
Sector pointDoes it answer a defined timing question?Distance, direction and split name
Return/paddock gateIs this timing or a separate safety checkpoint?Keep it distinct from official race timing
Backup observationWho records a missed or disputed passage?Named official and incident procedure

For a venue with changing layouts, the S-400 planning guide provides a diagram-first method. Use the station handover record to preserve point names between crews.

Make the map readable to someone who did not build it. Show the timing-room position, marshal posts and paddock return route. Add a version date. If a temporary barrier or pit configuration moves the control line, issue a new map and have the timing chief and race control sign it off.

Give every split a reason to exist. For example, a hill-climb organizer might need one elapsed time at the finish and a practice split at a named point where a course change is being evaluated. That does not mean every practice sensor belongs in the final competition setup. Keep practice and race modes labelled separately, and get written confirmation that the selected package supports both layouts as planned.

Rehearse the end-of-session sequence

Before cars run, test every configured point with a controlled pass. Check station labels, event sequence, result identity, power, radio or network conditions, and the operator's view of the line. Write what happens after a missed trigger: pause or continue, who reviews it, and which record remains provisional.

Then rehearse the finish call and vehicle return as a separate exercise with marshals and race control. A last-lap board, chequered flag, recovery vehicle and pit release are governed by the event's procedure, not by the S-400. Make sure the timing operator knows who can authorize a result correction and who can declare the track clear.

Choose evidence according to the dispute

For interval or sector analysis, an S-400 timing record may answer the question if the setup is confirmed. For a close finish where officials need image review, the ST-1000 page lists motorsport, sprint finish review and timing confirmation as applications. It does not establish that the two products automatically synchronize or that either package meets a particular championship's approval requirements.

Review the finish-line camera review workflow and the official-results explainer. For the event itself, the applicable sporting regulations and officials decide which evidence is valid.

Race finish timing questions

Can S-400 operate the chequered flag or recovery vehicle?

No such capability is stated on the product page. Flag and vehicle instructions remain under race control and the safety plan.

Can I add finish and sector sensors later?

Confirm the selected package, supported modes, sensor count and installation with 01TIMER before planning an expansion.

Can this be used for official classification?

Only after the organizer confirms the exact equipment and method meet the event rules. Do not infer approval from timing resolution or model name.

Before ordering: send the venue map, finish and sector definitions, event category, required record fields, operator positions and safety boundaries for a configuration review.